-
-
- 您現在的位置:首頁 >> 產品中心 >> 標準物質 >> 國立環境標準物質國立環境標準物質
-
-
中文名稱:茶葉成分分析標準物質
英文名稱:Tea Leaves II訂貨以英文名稱為準。
產品編號:NIES-CRM-23CAS:/
品牌:標準物質產地:日本
標準值:見證書分子式:/
規格 市場價(元) 折后價(元) 供貨周期 數量 加入購物車 35g 0.00 0.00 3-4周 加入購物車
-
-
產品詳細介紹
This environmental certified reference material (CRM) was developed and certified by the National Institute for Environmental Studies (NIES) for the determination of multi-elements in tea leaves and materials of similar matrix. This CRM supersedes NIES CRM No. 7 Tea Leaves.
Certified and Reference Values
The property values of the material were statistically determined based on chemical analyses by 12 organizations (including 16 laboratories) using a wide range of methods. A property value satisfying the following conditions was accepted as a certified value (Table 1): 1) the relative standard deviation associated with the mean of the laboratory means was 5 % or less; 2) the number of laboratories contributing to the mean of the laboratory means was at least eight; 3) the number of methods contributing to the mean of the laboratory means was at least two. The uncertainty attached to the certified values is the expanded uncertainty using a coverage factor k=2, corresponding to a confidence interval of approximately 95 %. A property value failing to satisfy the NIES criteria for certification but supplying valuable additional information about the material is given as a reference value (Table 2). All certified and reference values were determined based on dry mass.
Description of the Material
The material consists of powdered tea leaves (35 g) stabilized by 60Co irradiation (2.5 Mrad) in an amber glass bottle.
Instructions for Use
- This CRM should be kept tightly closed in its original bottle and stored in a desiccator at room temperature (≤30 ℃).
- Prior to weighing aliquots for analysis, the contents of the bottle should be shaken gently.
- For convenience of handling a minimum sample intake of 0.1 g is recommended.
- Precautions should be taken to avoid inhalation of the material.
- This CRM should not be used for purposes other than research. When disposing of the material, local laws concerning processing and disposal of waste materials should be strictly adhered to.
- The mass fractions of elements in this CRM are reported on a dry mass basis. This CRM, as received, contains 2-4 % water. Correction to dry mass should be determined by drying a separate sub-sample for 4 hours at 85 ℃.
- This CRM contains 50 % carbon, 5.1 % nitrogen, 98 mg/kg iron, and 17 mg/kg rubidium, although these values are neither certified nor reference values. An appropriate analytical method should be selected.
Expiration Date of Certification
The expiration date for the certified values of this CRM is July 2029 assuming that the recommended storage conditions are adhered to. NIES will notify via its website if any changes in the contents are recognized within the term of validity.
Collaborating Laboratories in Analysis
The certified and reference values for this CRM were based on the analytical values from the following participating organizations:
National Institute for Environmental Studies; Chuo University; Geo-Science Laboratory, Inc.; Green Blue Corporation; Japan Chemical Analysis Center; Japan Environment Sanitation Center; Murata Measuring Instrument Service Ltd.; Nagoya Institute of Technology; Nittech Research Corporation; Shimadzu Techno-Research, Inc.; Sumitomo Metal Mining Co., Ltd.; Tokyo City University.Organization Responsible for Preparation, Certification, and Distribution
The Environmental Analytical Chemistry Research Laboratory within the Laboratory of Intellectual Fundamentals for Environmental Studies, NIES, takes entire responsibility for this CRM. Technical information and the latest research reports regarding this material can be obtained from the following address.
Table 1 Certified values of NIES CRM No. 23 Tea Leaves II
Element Unit Mass fraction Analytical method Mg % 0.169 ± 0.012 ICP-AES, ICP-MS, INAA P % 0.472 ± 0.032 ICP-AES, ICP-MS K % 2.03 ± 0.11 AAS, ICP-AES, ICP-MS, INAA, XRF Ca % 0.249 ± 0.021 ICP-AES, ICP-MS, INAA, XRF Mn mg/kg 704 ± 52 ICP-AES, ICP-MS, INAA Ni mg/kg 7.89 ± 0.57 HR-ICP-MS, ICP-AES, ICP-MS Cu mg/kg 9.48 ± 0.76 HR-ICP-MS, ICP-AES, ICP-MS, XRF Zn mg/kg 31.9 ± 2.2 ICP-AES, ICP-MS, INAA Sr mg/kg 3.93 ± 0.25 HR-ICP-MS, ICP-AES, ICP-MS AAS, atomic absorption spectroscopy; HR-ICP-MS, high resolution inductively coupled plasma – mass spectrometry; ICP-AES, inductively coupled plasma – atomic emission spectrometry; ICP-MS, inductively coupled plasma – mass spectrometry; INAA, instrumental neutron activation analysis; XRF, X-ray fluorescence spectroscopy.
The uncertainty attached to the certified values is the expanded uncertainty using a coverage factor k=2, corresponding to a confidence interval of approximately 95 %.
All certified values were determined based on dry mass.Table 2 Reference values of NIES CRM No. 23 Tea Leaves II
Element Unit Mass fraction Analytical method S % 0.266 ICP-AES Na mg/kg 21.6 AAS, ICP-AES, ICP-MS, INAA Al mg/kg 540 ICP-AES, INAA Cs mg/kg 0.0932 ICP-MS, INAA Ba mg/kg 5.43 HR-ICP-MS, ICP-AES, ICP-MS AAS, atomic absorption spectroscopy; HR-ICP-MS, high resolution inductively coupled plasma – mass spectrometry; ICP-AES, inductively coupled plasma – atomic emission spectrometry; ICP-MS, inductively coupled plasma – mass spectrometry; INAA, instrumental neutron activation analysis; XRF, X-ray fluorescence spectroscopy.
All reference values were determined based on dry mass.